|
STANDARD ACCESSORIES
• NO.1 Well laid-out pressure spikes
• Fast knife replacement
• Fast and convenient belt tension adjustment.
• Automatic lubricator
• Feeding inverter
• Gear reducer
• Quick thickness setting(standard equipment on models GT-610A and GT-635ARD only. Optional for other models) Rear control device (610A,635ARDCentralized hand lubricator(standard equipment on models GT-610A and GT-635ARD only. Optional for other models)
• The four table rollers provide superior feeding performance
• Standard Y-delta motor starting
• Quick belt change for bottom cutterhead
• Automatic lubrication for feeding chain
• Automatic lubricator provides convenient lubrication to caterpillar chain slideways
• An air wrench is applied for removing or installing knives and saves knife change time
• The upper and lower cutter heads are spiral cutter heads
• The table surface is hard chrome plated and precision ground for extremely smooth feeding and maximum wear resistance
• The dovetailed slideways on the table elevation assure outstanding rigidity and stability
• Sectional infeed rollers
|
Well Laid - out pressure spikes
|
|
The pressure spikes are in an overlapped layout with a minimum of gaps that hold the workpiece firmly and evening ensuring shake-free feeding, even for short workpiece.
|
|
|
|
NO.1 Helical cutterhead
|
|
The helical cutterhead is precision machined Provides extremely fine surface of cut with minimum noise. The helical cutterhead is fitted with throw-away T.C.T knife bits.
|
|
|
|
Digital positioning control
|
|
The thickness of cut can be controlled by a digital positioning control. Once the preset position is reached, the table elevation stops automatically.
|
|
|
|
Automatic lubricator
The automatic lubricator delivers frequent lubrication oil to the caterpillar chain.
|
|
|
|
Feeding inverter
|
|
Digital display and quick operation to reduce wear on mechanical gearbox.
|
|
|
|
Gear reducer
|
|
Reduce wear caused by temperature rise and improve efficiency of power transmission.
|
Specification
|
Model
|
GT- 635ARD
|
|
Maximum Width Of Cut
|
635mm ( 25" )
|
|
Maximum Thickness Of Cut
|
200mm ( 8" )
|
|
Minmum Thickness Of Cut
|
10mm
|
|
Minmum Lenght Of Cut
|
310mm
|
|
Knife Nos.Cutterhead
|
156pcs
|
|
Knife Sizes
|
TCT 15x15x2.5mm
|
|
Cutterhead Diameter
|
ø126mm
|
|
CutterHead Speed
|
5000RPM
|
|
Variable Feed Speed- inverter
|
8 - 24m/min
|
|
Dust Hood Outlet Diameter
|
6"x2
|
|
Table Surface Area
|
27"x103"
|
|
Top Cutterhead Drive Motor
|
20( 25HP )
|
|
Buttom Cutterhead Drive Motor
|
15( 20HP )
|
|
Feed Drive Motor
|
3HP
|
|
Upper Mechanism Elevation Motor
|
1/2HP
|
|
Machine Dimensions(LxWxH)
|
2700x1145x1720mm
|
|
Net Weight
|
3000kg
|
|
Packing Dimensions(LxWxH)
|
2780x1240x1940mm
|
|
Gross Weight
|
3500kg
|
※ To ensure technological excellence, specifications are subject to change without prior notice.
|